Timberland PRO Stockdale 8" Alloy Toe Waterproof Pull-On Work Boot — Black — TB1A1AXG001
A good, reliable pull-on work boot: the Stockdale pairs an alloy safety toe with seam-sealed waterproofing and Timberland PRO's GripMax outsole.
Abrasion-resistant Ever-Guard™ waterproof leather vamps on a water-resistant, non-wicking synthetic upper with seam-sealed construction, electrical hazard protection, the ergonomic PowerFit™ Comfort System, and a heat-, oil-, slip-, and abrasion-resistant GripMax rubber outsole with a Ladder Lock™ heel.
Key Features of the Timberland PRO TB1A1AXG001
-
Asymmetrical Alloy Safety Toe — A lightweight metal cap meeting ASTM F2413 impact and compression standards, thinner than composite for more toe-box room.
-
Electrical Hazard Rated — Secondary underfoot protection against live circuits.
-
Seam-Sealed Waterproof Construction — Ever-Guard™ waterproof leather vamps on a water-resistant, non-wicking synthetic upper.
-
8" Pull-On Shaft — No laces; step in and go.
-
GripMax Rubber Outsole — Heel and forepart center pods for slip resistance; heat-resistant up to 1,000°F; oil-resistant and non-marking, with a Ladder Lock™ heel.
-
PowerFit™ Comfort System — Ergonomically designed support for long hours on your feet.
-
Fiberglass Shank — Structural support with no steel in it.
-
Molded Open-Cell Footbed — Wicks moisture and resists compression.
-
ReBOTL™ Lining with Antimicrobial Odor Control — Breathable, moisture-wicking fabric made with at least 50% recycled plastic.
-
Weight — 1.27 lb per boot in a men's size 9. Imported.
Why a Pull-On
A one-piece pull-on has no laces — nothing to tie, nothing to snag on equipment, and no eyelets or lace gaps for sparks, mud, or chaff to find. The Stockdale's synthetic shaft keeps it light, and the Ever-Guard™ leather vamp takes the abrasion where a pull-on scuffs first.
GripMax Traction and Heat Resistance
The GripMax outsole uses "wiper" pods at the heel and forefoot for slip resistance on wet floors, and the compound is heat-resistant to 1,000°F — useful on hot asphalt, near kilns, and around welding — with a Ladder Lock™ heel that catches rungs squarely.
Why Choose the TB1A1AXG001?
A waterproof, EH-rated, alloy-toe 8" pull-on that weighs under a pound and a half per boot, with a heat-resistant GripMax outsole — the pick for shop, plant, and delivery work where you want a light boot you step into.
Similar Styles to Consider
Want a steel toe and full-grain leather in a pull-on? The Rigmaster TB189604270. Prefer a metal-free lightweight pull-on? See the Boondock Ultralight Wellington TB0A6473EM4.
Shop more: Timberland PRO 8 Inch Boots, Timberland PRO Safety Toe, Timberland PRO Waterproof
Frequently Asked Questions
What safety standards does the Stockdale TB1A1AXG001 meet?
An alloy safety toe rated to ASTM F2413 for impact and compression, and electrical hazard protection for secondary protection against live circuits.
How does an alloy toe compare to steel and composite?
All three meet the same impact and compression thresholds. Alloy is markedly lighter than steel and nearly as thin, so it preserves toe-box room; composite is the only fully non-metallic option, but bulkier at the same rating.
Is the Stockdale waterproof?
Yes. Seam-sealed construction with Ever-Guard™ waterproof leather vamps and a non-wicking synthetic shaft keeps water out from the ground up.
How should an alloy-toe pull-on fit?
Fit at the instep and heel matters more than length on a pull-on, since there are no laces to adjust. The alloy cap does not stretch, so size for room across the toes from day one; a slight heel slip on the first wear settles as the vamp breaks in.
How heat-resistant is the outsole?
Timberland rates the GripMax rubber compound heat-resistant up to 1,000°F, with oil-resistant, non-marking performance — built for hot surfaces and sparks as well as wet floors.
Is the Stockdale insulated?
The TB1A1AXG001 is a waterproof, uninsulated three-season boot. For cold-weather work, Timberland PRO's insulated Boondock and Siberian lines are the better fit.