Timberland PRO Men's Bosshog 6" Composite Toe Waterproof Work Boot - Brown/Orange — TB1A1XK1214
The Timberland PRO Bosshog 6" is a CSA green-triangle work boot — a CarbonShield composite toe, a non-metallic puncture plate, a waterproof membrane, and a heat-resistant rubber outsole in a light 6-inch build.
A waterproof full-grain leather upper with an internal waterproof, blood-borne-pathogen-resistant membrane, a CarbonShield composite toe rated ASTM F2413 I/75 C/75 and CSA Z195 Grade 1, a non-metallic puncture-resistant plate, an electric-shock-resistant sole, a padded collar, a fiberglass shank, a dynamic Anti-Fatigue Technology footbed, an antimicrobial mesh lining, and a non-marking Timberland PRO rubber outsole heat-resistant to 572°F, on cement construction.
Key Features of the Timberland PRO Bosshog 6" TB1A1XK1214
- Waterproof full-grain leather with an internal waterproof, blood-borne-pathogen-resistant membrane — ASTM F1671
- Composite safety toe with CarbonShield technology — ASTM F2413 I/75 C/75 and CSA Z195 Grade 1
- Non-metallic puncture-resistant plate
- CSA green triangle — toe protection, puncture resistance, and an electric-shock-resistant sole
- Padded top collar
- Fiberglass shank
- Dynamic Anti-Fatigue Technology footbed
- Non-marking Timberland PRO rubber outsole — slip-, oil-, and abrasion-resistant, heat-resistant to 572°F (300°C) per EN ISO 20344
- Mesh lining with antimicrobial treatment
- Cement construction
- Weight: about 1.8 lb per boot (size 9)
CSA Green Triangle in a 6-Inch Boot
The green triangle means toe protection, a puncture-resistant sole, and an electric-shock-resistant sole to Canada's CSA Z195 standard — the rating many Canadian and cross-border sites require — here with a non-metallic plate that flexes more than steel.
An Outsole Built for Heat
The Timberland PRO rubber outsole is tested heat-resistant to 572°F (300°C), non-marking, and slip-, oil-, and abrasion-resistant, so it holds up on hot asphalt, near process equipment, and on finished floors alike.
Why Choose the Timberland PRO TB1A1XK1214?
A waterproof, composite-toe, puncture-resistant 6-inch boot with CSA green-triangle protection — the pick for construction, demolition, and industrial sites that specify CSA or PR soles.
Similar Styles to Consider
Shop more: Timberland PRO Boots, Composite Toe Work Boots, Puncture Resistant Boots, CSA Compliant Boots
Frequently Asked Questions
What safety standards does the Bosshog TB1A1XK1214 meet?
The CarbonShield composite toe meets ASTM F2413 I/75 C/75 and CSA Z195 Grade 1; the non-metallic plate provides puncture resistance, the sole is CSA electric-shock-resistant, and the membrane meets ASTM F1671 for blood-borne pathogens.
Is the Bosshog waterproof?
Yes. Waterproof full-grain leather over an internal waterproof membrane keeps water out while letting moisture escape.
How does the Bosshog fit?
It fits true to size — order the size you wear in athletic shoes, and choose Wide if you normally need an EE width. The composite toe leaves more room than steel, and the Anti-Fatigue footbed is removable.
What does the non-metallic puncture plate do?
It sits between the midsole and outsole to stop nails and sharp debris from pushing through, and because it is not steel it flexes more naturally and does not conduct cold.
What's the difference between the Bosshog boots?
Same CarbonShield composite toe, puncture plate, and waterproof membrane. The TB1A1XK1214 is the Brown/Orange colorway; the TB1A1WSB214 is Brown; the TB1A1XJP001 is Black.
How do I care for the Bosshog?
Knock off dirt, wipe the leather clean, let the boot dry away from direct heat, and condition the leather every few months. Cement construction is not resoleable, so rotate pairs to extend the outsole.
